From the Freedom Induction one-piece surface to Masterpiece gas burners with star-shaped grates, we diagnose and repair Thermador cooktops on-site. Same-day slots most days, OEM-quality parts, honest flat diagnostics.
Thermador builds several distinct cooktop platforms, and each one fails in its own way. We work on all of them across Littleton and the surrounding foothills.
The Freedom Induction line (CIT30 and CIT36 series) uses a single continuous glass surface with a color touch display and dozens of inductors underneath. When one of those inductors or its control board drops out, you see a specific zone go dark or throw an F-code while the rest of the surface still heats.
The Masterpiece and Professional gas cooktops (SGSX and PCG series) use the signature Star burner with the extra-low ExtraLow simmer setting. These fail differently again: clicking igniters that won't stop, a burner that lights on high but drops out at simmer, or a sealed burner that won't light at all after a spill works into the spark module.
We also repair Thermador electric radiant coil and smoothtop units and the modular Masterpiece downdraft pairings. Whatever platform you own, the model and serial tag lives on the underside of the unit or inside the base cabinet.
If your unit is doing any of these, it is a repair we see regularly on Thermador equipment:
At roughly 5,350 feet, Littleton's thin air changes how a gas cooktop breathes. Thermador Star burners are tuned at the factory for a range of elevations, but a burner that drips to orange, roars, or refuses to hold the ExtraLow simmer often needs its air shutter and orifice checked against altitude spec.
The dry Front Range climate is also hard on the spark modules and igniter wiring. Repeated boil-overs dry and crack, then arc to ground, which is why a single Thermador burner will click continuously. We verify the calibration and clean or replace the spark electrode rather than just swapping parts blindly.
Every call follows the same clear path so you know what to expect and what it costs before we start.
Call (720) 903-2603 or use our online scheduler. Having your Thermador model number (CIT, SGSX, PCG, etc.) ready lets us stage the right induction inductor, spark module, or valve.
Our technician tests the actual failure, reads any Freedom Induction error codes, and checks igniters, valves, control boards, and burner calibration. The diagnostic is a flat $89, credited toward the repair.
You get a firm price for the fix. Because we quote after seeing the fault, there are no surprise add-ons once the cooktop is open.
We install factory-specified components, recalibrate gas burners to altitude when relevant, and confirm every zone or burner works before we leave.
Littleton Appliance Repair is an independent shop. We are not authorized or certified by Thermador, and we will never pretend otherwise. What we offer is real experience with these exact cooktops, OEM-quality parts, and straight answers.
We cover Littleton plus Ken-Caryl, Columbine, Chatfield, Roxborough Park, and the southwest Denver metro within about 25 miles. Service visits run daily 8:00 AM to 6:00 PM, and the phone is answered around the clock.
Quick Answers
Littleton Appliance Repair services Thermador cooktops throughout Littleton and southwest Denver, including Freedom Induction, Masterpiece gas Star-burner, and electric models. We are an independent shop working since 2014 with OEM-quality parts. Call (720) 903-2603 to book a same-day visit.
Continuous clicking on a Thermador Star burner usually means the spark electrode is dirty, cracked, or shorting to ground, often after a spill or boil-over. The igniter keeps firing because it cannot confirm the flame. Cleaning or replacing the spark module fixes it; a technician can diagnose it on-site for a flat $89 fee.
We charge a flat $89 diagnostic service-call fee, which is credited toward the repair once you approve it. The final repair price is quoted on-site after we identify the exact fault, so you always see the number before any work begins.
FAQ
Anything else — call any hour, a real person answers.
Usually yes. On the CIT30 and CIT36 Freedom Induction cooktops, a single dead zone typically points to a failed inductor coil or its control board, not the whole cooktop. We test the affected inductor and replace the faulty component with an OEM-quality part.
A burner that lights on high but drops out at ExtraLow often has a partially blocked orifice, a misaligned air shutter, or a simmer setting knocked off altitude calibration, which matters at Littleton's 5,350-foot elevation. We clean, adjust, and recalibrate the burner so the low flame stays lit.
We assess it case by case. A chipped or fully cracked glass-ceramic surface on a Thermador induction or radiant unit usually needs a replacement glass panel rather than a fix, and we can source the OEM-quality part and quote the job after inspection.
We serve Littleton and the nearby communities of Ken-Caryl, Columbine, Chatfield, Roxborough Park, and the southwest Denver metro, roughly a 25-mile radius. Service visits run daily from 8:00 AM to 6:00 PM.
Answered 24/7 · $89 diagnostic credited to the repair
Book OnlineReviews
Our built-in Sub-Zero was keeping the freezer fine but the upper fridge zone was sitting around 55. Turned out to be the dual-evaporator setup, exactly what the tech guessed on the phone. Brian had the sealed system diagnosed the first visit, ordered the part, and had us back to normal within the week. He didn't try to sell us a new unit like the last place did.
One of the dual-stack burners on our Wolf range would click and click but never light. He mentioned it's common up here because the burners need to be calibrated for the altitude, which no one had ever told us. Relit perfectly after and he adjusted the others while he was at it.
Fixed our Sub-Zero the same week we called. Fair price, no upsell.
Our dual-zone wine cabinet had drifted so the bottom zone wouldn't hold temp and there was condensation collecting on the glass. They diagnosed it quickly but the part had to come from the manufacturer and took about four days, so we were without it for most of a week. Once it arrived the fix was solid and both zones are holding right where they should. Worth the wait, just be ready for the parts delay on these.
Miele dishwasher wouldn't drain, standing water in the bottom every cycle. Bad drain pump. In and out in about an hour and he cleaned out the filter housing that was part of the problem too.
The door gasket on our 15-year-old Sub-Zero had gotten brittle and it was sweating around the seal. New OEM gasket and it seals like new again. Appreciated that they used the factory part instead of some universal thing.
Thermador wall oven quit heating right before we were hosting. Called in the morning and they got someone out that same afternoon. Bad igniter. He had the part on the truck and we still made our dinner.
Ice maker in our Sub-Zero was making cloudy hollow cubes and barely any of them. He flushed the system, replaced a valve, and now it actually keeps up when we have people over. Nice guy, wore booties in the house without being asked.
Solid work on our Bosch dishwasher, the drain pump had failed. The only thing is the $89 service call fee felt a little steep before I knew they credit it toward the repair. Once I proceeded it came off the bill, so no real complaint, just wish I'd understood that up front.
Our Viking freezer was building up a wall of frost and not defrosting on its own. Turned out to be the defrost heater. Fixed it and explained what was going on so I understood why it happened.
Two burners on our Wolf cooktop wouldn't spark. Tech recalibrated them for the elevation and swapped the igniters. Works better than it has in years honestly.
Warm upper zone on our Sub-Zero, classic apparently. They knew exactly what it was, ordered the evaporator part, and came back to install it a couple days later. Honest and easy to deal with the whole way through.
Not many people around here will even touch a Gaggenau. These guys did, got the control board sorted, and were straight with me about the cost of the part on a unit this expensive.
Miele steam oven throwing an error and shutting off mid-cook. The tech was great and clearly knew the unit, but he ran about 40 minutes behind the window they gave me and I had to shuffle some things around. Fixed it in one visit though and it's been perfect since, so I'd still call them again.
Had them out for our built-in outdoor grill that wasn't lighting evenly. Didn't expect them to do outdoor units but they did and dialed it in for the altitude. Grilling season saved.
Quick, clean, and they answered when I called at 9pm the night before. Dishwasher's draining again.
This was a big one, the sealed system on our Sub-Zero failed and that's a job a lot of shops won't take on. They did it right, used factory-spec parts, and stood behind the work. Given it's a $12k built-in I'm glad I found someone who actually knew these inside and out instead of just replacing the whole fridge.
Wine fridge kept fogging up on the door and the temp was bouncing around. Fixed same visit and no more condensation.